What Is The Cleaning Process Of PEX Fittings Plastic Pipes?

　　The traditional PEX fittings plastic cleaning method is to uses high-pressure water flushing. Although this method is relatively simple and convenient, it is difficult to thoroughly clean the dirt that adheres to the inner wall of the pipe due to incomplete cleaning. Therefore, currently, PEX fittings plastic is cleaned with a special cleaning fluid. The cleaning method of zhengpeng PEX fittings plastic pipe:

　　1, open the PEX fittings plastic hot water inlet pipe;

　　2, pour a bottle of PEX fittings plastic cleaning solution (300g) into the hot water inlet pipe diluted 1:10-50;

　　3. Make sure that the PEX fittings plastic pipe is filled with water, close the cold water valve, and start the circulating pump for 30 minutes;

　　4. Open the cold water valve and drain the dirty water;

　　5. Rinse the PEX fittings plastic pipe with clean water until clean water flows out from the outlet pipe, and the cleaning work is completed.

　　The above is some of the content about the repair and cleaning of PEX fittings plastic pipes introduced by the editor today. If you want to know more related information, you can bookmark our website. We will update it regularly.