Pay Attention To The Laying Of Tiles By PPSU PEX Fittings

　　PPSU PEX fittings What should be paid attention to when laying tiles after the paving is completed? Below, we will introduce for you:

　　1. Pay attention to the gaps when laying tiles in PPSU PEX fittings. The gaps are mainly for the thermal expansion and contraction of the tiles to leave space, and the size of the tiles may not be all regular. A proper gap can compensate for the defects of different sizes of tiles.

　　2. Use foam on the wall to make an expansion layer, and it is best not to decorate the wall immediately after laying the floor tiles. Wait until the ground is dry and decorate the wall. If the ground is not dry, decorate the wall, which will cause the wall to peel and empty after the decoration. drum.

　　3. There must be expansion joints on the wall. The lower part of the floor tiles to be laid by PPSU PEX fittings needs to be ground at a 45-degree angle. This is to prevent the tiles from swelling and bulging, and the tiles will not loosen.

　　4. It is best not to press the ground with sharp objects or heavy objects, which will easily damage the PPSU PEX fittings.

　　5. When the ceramic tiles are transported back from other places, it is best to put them on the ground for a few days. Because the temperature difference in each area is different, there will be slight thermal expansion and contraction when the tiles are transported from other places. It can be placed indoors for a few days. Adapting the temperature of the tiles to the temperature of the laying area can reduce the deformation of the tiles.